The exact position of components at the respective bolting points must be ensured in all areas of a vehicle, whereby the fastening of cross car beams is particularly challenging. WITOLs solve this challenge confidently in the assembly process.
Precise cross car beam fastening: The challenge
The cross car beam and car body are bolted together absolutely securely and extremely precisely in a special assembly process. Due to the size of the cross car beam, this often proves to be a challenge: unavoidable and relatively high tolerances must be perfectly compensated for during bolting.
Another problem is the blind assembly. This is because the screw points between the cross car beam and the vehicle body are not fully visible and the connection must be made without a direct view of the screw connection points.
Securely connect cross car beam and body: The solution
WITOL tolerance compensation systems for cross car beams address the problem and find solutions for safe installation accurate to the millimeter. The WITOLs are particularly helpful for cross car beams due to the deliberate undersizing of components. This allows the instrument panel to be better positioned in the body in white. The high tolerances at the screw points and resulting joint gaps are reliably compensated for in just one single step.
Our claim, your advantages
Rely on the highest quality of our fastening solution. All WITOLs are subject to the strictest controls and undergo a functional test before they leave our factory. In the course of development, extensive tests are of course also carried out on corrosion resistance and behavior under various climatic conditions.